Speedfit Fittings

Speedfit Fittings

  • Eltek

    Eltek Water Block Safety System

    $99.99
    Eltek Water Block Safety System Burst Pressure: 725 PSI. Max. Static Pressure: 145 PSI. Min. Flow Rate: .5 GPM. Max. Water Temperature: 158°F. Inlet/Outlet To: Max Adapter Tee 3/8" Compression. Outlet Bottom: 1/4" Quick Connect Speedfit...
  • Holiday House

    HHD 3/4" BSP SpeedFit Elbow Connector

    $9.99
    HHD 3/4" BSP SpeedFit Elbow Connector The adapter is produced in brass and polypropylene. 3/4" BSP to SpeedFit, available in two sizes. Sold As: 1 ea. Available Sizes FBSPEG4 - 3/4" BSP x 1/4" SpeedFit. FBSPEG6 - 3/4" BSP x 3/8" SpeedFit.
  • John Guest

    John Guest Espresso Female Nut Assembly

    $8.99 - $9.99
    John Guest Speedfit Espresso Connector This connector is used for espresso machines. Thread type is BSP. Sold As: 1 ea. Available In Different Sizes: NC2145: 1/4" Tube x 3/4" BSP. NC2249: 3/8" Tube x 3/4" BSP. Multi Volume John Guest Discount Enter...
  • John Guest

    John Guest Polypropylene Shut-Off Valve

    $6.99 - $7.99
    John Guest Polypropylene Shut-Off Valve The John Guest Polypropylene Shut-Off Valve is the most reliable valve on the market. Push-fit technology. Quick disconnection without the need for tools. High chemical resistance. EPDM seals. 1/4 turn from open...
  • John Guest

    John Guest PP0208W Speedfit Tee Connector

    $5.99
    John Guest PP0208W Speedfit Tee Connector Push-fit technology. Quick disconnection without the need for tools. High chemical resistance. Food quality and suitable for potable liquids and pure water applications. Not suitable for compressed air and...
  • John Guest

    John Guest PPM0208W Speedfit Tee Connector

    $6.48
    John Guest PPM0208W Speedfit Tee Connector Push-fit technology. Quick disconnection without the need for tools. High chemical resistance. Food quality and suitable for potable liquids and pure water applications. Not suitable for compressed air...
  • John Guest

    John Guest Push-Fit End Stop

    $1.19
    John Guest Push-Fit End Stop The body is produced in polypropylene. Push-fit technology. Quick disconnection without the need for tools. Food Grade and suitable for potable liquids. Use with soft or metal tubes. Use with liquids, air, or inert gases. ...
  • John Guest

    John Guest Speedfit Bulkhead

    $3.19 - $4.49
    John Guest Speedfit Bulkhead The body is produced in polypropylene. 'O'Rings are EPDM. The collet is produced in polypropylene with stainless steel teeth. The bulkhead nut is produced in brass. Sold As: 1 ea.   Available In Different Sizes: ...
  • John Guest

    John Guest Speedfit Checkvalve

    $12.99
    John Guest Speedfit Checkvalve Valves with low fixed cracking pressure (i.e 10cm water column), that have not been activated for some time may take several seconds to reseal. It is recommended that the non-return valve is regularly checked and...
  • John Guest

    John Guest Speedfit Cross Connector

    $5.99
    John Guest Speedfit Cross Adapter The body is produced in acetal copolymer. 'O'Rings are nitrile rubber. The collet is produced in acetal copolymer with stainless steel teeth. PI4712S: 3/8" x 3/8" x 3/8" x 3/8" Tube. Sold As: 1 ea. Multi Volume John...
  • John Guest

    John Guest SpeedFit Elbow Connector

    $1.99 - $3.59
    John Guest Speedfit Elbow Connector The body is produced in polypropylene. 'O'Rings are EPDM. The collet is produced in polypropylene with stainless steel teeth. Sold As: 1 ea. Available In Different Sizes: PP0308W: 1/4" Tube x 1/4" Tube. PP211008W:...
  • John Guest

    John Guest Speedfit Locking Clips

    $29.99
    John Guest Speedfit Locking Clips John Guest Locking clips secure the collet in position to prevent an accidental disconnection of the tube. The entire body is produced in acetal copolymer. John Guest locking clips are available in 3 different sizes...